ELECTROMEN
EM-316A is brushless DC-motor driver with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets
also todays EMC requirements. The driver can be used with 120° or 60° commutation. The unit has the basic digital command inputs
like direction, brake, start/stop, disable and there is analog inputs for speed and current control. One digitally presetable second speed
(speed-2) is possible to activate with digital command input. EM-316 has two NPN outputs for fault and overcurrent indication use.
Some input and output functions can be modified with parameters. Driver includes overvoltage, undervoltage and overtemperature
protections. These fault situations are indicated with fault on-board LED. Overtemperature and current limit situations can be reset
with reset input, reset-timer or by setting analog speed control to value to 0.
There are two control options for speed. Direct control ( open loop ) sets motor voltage in propotion to control voltage as with
a standard DC-motor. Closed loop uses hall sensor feedback for speed control, this modeoffers good speed regulation.
Start and stop ramps work in both mode. Speed adjust range, closed loop rpm range and rampse can be set with parameter.
Anolog input are filtered so that there can also use PWM signal for control speed and current.
EM-316A has added card slot for EM-A1card, which make possible to use symmetric control -5..0..+5V ( rev-stop-fwd )
EM-A1 card generate also -5V auxliary voltage for local potentiometer control
Setting can be done digitally with EM-236 interface unit or with Emen-Tool lite program installed in PC and EM-268 adapter cable.
Parameters stored into nonvolatile memory of device. This interface unit can also be monitored the current and rpm of motor.
Device can be installed in DIN-rail base and some enclosure options are also available.
FEATURES
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Current limit and trip
- Fault and overcurrent outputs
- 60° / 120° commutation options
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-316A is compatible with EM-316
- Added EM-A1 card slot for ±10V control
- Rpm-pulse output option ( prog v1.5 )
Częstotliwość PWM | 16kHz |
---|---|
Dostawca | Electromen |
Maksymalny prąd ciągły | 10 A |
Masa | 200 g |
Montaż | szyna DIN |
Napięcie zasilania | 12 V DC, 24 V DC |
Odpowiedni silnik | Bezszczotkowy DC |
Prąd szczytowy | 25 A |
Rodzaj sterowania | Prędkość, Hamowanie, Kierunek, Moment, Soft start/stop |
---|---|
Sygnał niski - logiczne 0 | <1V = OFF |
Sygnał wysoki - logiczne 1 | >4V = ON |
Wejście analogowe | 0-5V lub 0-10V lub ±5V lub ±10V |
Wymiary dł x sz x wy | 89x73x32 mm mm |
Zakres ustawień prądu | 0.1-25 A |
EM-316A is brushless DC-motor driver with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets
also todays EMC requirements. The driver can be used with 120° or 60° commutation. The unit has the basic digital command inputs
like direction, brake, start/stop, disable and there is analog inputs for speed and current control. One digitally presetable second speed
(speed-2) is possible to activate with digital command input. EM-316 has two NPN outputs for fault and overcurrent indication use.
Some input and output functions can be modified with parameters. Driver includes overvoltage, undervoltage and overtemperature
protections. These fault situations are indicated with fault on-board LED. Overtemperature and current limit situations can be reset
with reset input, reset-timer or by setting analog speed control to value to 0.
There are two control options for speed. Direct control ( open loop ) sets motor voltage in propotion to control voltage as with
a standard DC-motor. Closed loop uses hall sensor feedback for speed control, this modeoffers good speed regulation.
Start and stop ramps work in both mode. Speed adjust range, closed loop rpm range and rampse can be set with parameter.
Anolog input are filtered so that there can also use PWM signal for control speed and current.
EM-316A has added card slot for EM-A1card, which make possible to use symmetric control -5..0..+5V ( rev-stop-fwd )
EM-A1 card generate also -5V auxliary voltage for local potentiometer control
Setting can be done digitally with EM-236 interface unit or with Emen-Tool lite program installed in PC and EM-268 adapter cable.
Parameters stored into nonvolatile memory of device. This interface unit can also be monitored the current and rpm of motor.
Device can be installed in DIN-rail base and some enclosure options are also available.
FEATURES
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Current limit and trip
- Fault and overcurrent outputs
- 60° / 120° commutation options
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-316A is compatible with EM-316
- Added EM-A1 card slot for ±10V control
- Rpm-pulse output option ( prog v1.5 )
Firma Technosoft specjalizuje się w opracowywaniu inteligentnych napędów, łączących w sobie sterownik silnika i kontroler ruchu w jednym urządzeniu, w celu realizacji złożonych funkcji ruchu.
Pojazdy AGV wymagają wyspecjalizowanych kontrolerów ruchu, niezawodnych i dających duże możliwości programowania. Taki właśnie jest iGVD71 firmy Technosoft.
Nasze główne cele to zapewnienie stabilnego i rentownego rozwoju biznesu, zmniejszanie negatywnego wpływu na środowisko, utrzymanie wysokiej etyki pracy oraz bycie atrakcyjnym pracodawcą i partnerem biznesowym.
Precyzyjne przekładnie planetarne z piastą znajdują zastosowanie w napędach pojazdów AGV i AMR. Firma Newstart Motion oferuje dwie serie przekładni zakończonych piastą: AD – w wykonaniu prostym oraz ADR – w wykonaniu kątowym.
Pierścienie ślizgowe marki Kübler są wsparciem dla przemysłu na każdym etapie procesu pakowania – od maszyn flow pack, etykietujących, po systemy magazynowe.
Jednym z najczęściej używanych narzędzi w automatyce przemysłowej jest sterownik PLC, który wraz z interfejsem HMI stanowi przyjazną dla użytkownika wydajną kombinację.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Warianty produktu | Cena | ||
---|---|---|---|
Sterownik silnika BLDC, 4Q, 12-35V DC, 10A
Nr produktu:
EM-316A
Skopiowano
|
|
Wybierz wariant produktu z listy
Product Manager SILNIKI I MOTOREDUKTORY
Jeśli potrzebujesz pomocy skontaktuj się z nami: