TAKEX
BGS : Background suppression
- The sensor doesn't detect objects or background being out of the setting distance.
- This mode is suited for the detection of a target without background.
FGS: Background recognition: BGR (Foreground suppression)
- The sensor recognizes a background and detects a target by sensing the change in received light intensity.
- This mode is suitable for the detection of a target on a stable background.
Additional 25.4mm pitch mounting holes (Middle range models)
In addition to the conventional 29mm pitch holes, universal inch (25.4mm) pitch holes are equipped.
Wide selection of detection distance
Detection distance of 30mm, 40mm, 50mm and 100mm are available for Short range model, and 100mm, 150mm, 200mm and
300mm are available for Middle range model. Distance setting is not necessary when using the sensor at the specified distance.
Automatic interference prevention (Up to 2 sensors)
Prevents the mutual interference between adjacent two sensors by shifting the transmitting pulse automatically.
NPN/PNP dual output
The dual output enables inventory management more efficient. Model numbers followed by "P" are PNP models for which PNP output is allocated to the primary (black/ PIN 4) output.
Unique optical design realizes better performance and long detection distance with the compact housing (Short range models)
Maximum detection distance: 100mm (Actual size)
Available in sizes smaller than conventional BGS sensors and cover various methods of photo sensing.
Czas reakcji | 0,5 ms |
---|---|
Dopuszczenia | CE |
Funkcja | Załącz, gdy jasno/ciemno |
Materiał obudowy | PBT |
Materiał soczewski | Poliwęglan |
Max. napięcie DC | 24 V |
Min. napięcie DC | 12 V |
Pobór mocy (max) | 0,018 A |
Podłączenie elektryczne | Kabel 2 m |
Prąd wyjściowy max. | 0,1 A |
Przełącznik załącz gdy jasno / załącz gdy ciemno | Tak |
---|---|
Stopień ochrony IP | IP67 |
Technologia czujnika | Z tłumieniem tła |
Typ światła | LED czerwony |
Wyjście | NPN, PNP |
Zakres max | 100 mm |
Zakres min | 10 mm |
Zakres temperatur do | 55 °C |
Zakres temperatur od | -25 °C |
BGS : Background suppression
- The sensor doesn't detect objects or background being out of the setting distance.
- This mode is suited for the detection of a target without background.
FGS: Background recognition: BGR (Foreground suppression)
- The sensor recognizes a background and detects a target by sensing the change in received light intensity.
- This mode is suitable for the detection of a target on a stable background.
Additional 25.4mm pitch mounting holes (Middle range models)
In addition to the conventional 29mm pitch holes, universal inch (25.4mm) pitch holes are equipped.
Wide selection of detection distance
Detection distance of 30mm, 40mm, 50mm and 100mm are available for Short range model, and 100mm, 150mm, 200mm and
300mm are available for Middle range model. Distance setting is not necessary when using the sensor at the specified distance.
Automatic interference prevention (Up to 2 sensors)
Prevents the mutual interference between adjacent two sensors by shifting the transmitting pulse automatically.
NPN/PNP dual output
The dual output enables inventory management more efficient. Model numbers followed by "P" are PNP models for which PNP output is allocated to the primary (black/ PIN 4) output.
Unique optical design realizes better performance and long detection distance with the compact housing (Short range models)
Maximum detection distance: 100mm (Actual size)
Available in sizes smaller than conventional BGS sensors and cover various methods of photo sensing.
Wyłączniki krańcowe IN73 i MN78 firmy Bernstein idealnie nadają się do małych prądów.
W przypadku komponentów elektronicznych umieszczonych w pobliżu obszarów o dużym zasoleniu, wilgoci, narażonych na korozję, kontakt z chemikaliami czy innymi przedmiotami może być niezbędne zastosowanie powłoki konformalnej.
Przetwornik pomiarowy to dla automatyka jeden z ważniejszych elementów w układzie pomiarowym. To właśnie tutaj podłączane są przewody z czujników monitorujących procesy.
Napęd serii WD składa się z niezwykle krótkiego koła jezdnego, zintegrowanej przekładni planetarnej oraz łożyska. W połączeniu z silnikiem BLDC i kontrolerem firmy Nanotec stanowi niezwykle kompaktowe rozwiązanie, które upraszcza konstrukcję, poprzez zmniejszenie ilości wymaganych komponentów, w samobieżnych systemach jezdnych, takich jak roboty usługowe lub pojazdy AGV.
Napędy w pojazdach AGV czy AMR wymagają niezwykle starannego doboru. Źle dobrane komponenty mogą fatalnie przełożyć się na niepowodzenie całej aplikacji i ostatecznie wykluczyć nasz pojazd w dalszych inwestycjach.
PR electronics jako wiodący producent przetworników pomiarowych, stawia na wysokiej jakości rozwiązanie powszechnych problemów w kondycjonowaniu sygnałów.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Warianty produktu | Materiał obudowy | Materiał soczewski | Podłączenie elektryczne | Zakres max | Zakres min | Cena | ||
---|---|---|---|---|---|---|---|---|
![]()
Czujnik fotoelektr. odbiciowy z wytłum. tła 10-100mm PNP/NPN
Nr produktu:
DLN-S10RVP
Skopiowano
|
PBT
|
Poliwęglan
|
Kabel 2 m
|
100 mm
|
10 mm
|
| ||
![]()
Czujnik fotoelektr. odb. z wytłum. tła 100mm zł.M8 PNP/NPN
Nr produktu:
DLN-S10RVP-J
Skopiowano
|
|
|
Złącze M8 4-pinowe, Kabel 2 m
|
100 mm
|
10 mm
|
| ||
Czujnik fotoelektr. odbiciowy z wytłum. tła 20-300mm PNP/NPN
Nr produktu:
DLN-S30RMVP
Skopiowano
|
PBT
|
Poliwęglan
|
Kabel 2 m
|
300 mm
|
20 mm
|
| ||
Czujnik fotoelektr. odb. z wytłum. tła 300mm zł.M8 PNP/NPN
Nr produktu:
DLN-S30RMVP-J
Skopiowano
|
PBT
|
Poliwęglan
|
Złącze M8 4-pinowe, Kabel 2 m
|
300 mm
|
20 mm
|
|
Wybierz wariant produktu z listy
Product Manager MASZYNY
Jeśli potrzebujesz pomocy skontaktuj się z nami: